The paper slitter has different paper widths during the slitting process. The slitter is a mechanical device that uses paper to seal the carton. The machine can realize automatic paper conveying, automatic sealing and automatic paper cutting. In the case of a slitter, the top cover can also be folded automatically, but it is inseparable from the paper regardless of the sorter used. Similarly, the paper slitter cuts the wide web and rewinds it into paper processing equipment of varying widths and diameters. So what is the widest width of the slitter?

 

There are two factors that determine the width of the paper slitter paper, one is the paper cutter and the other is the paper guide roller. As the name implies, the tool determines the width of the paper that can be cut, but this does not mean that the wide cutter must cut the width of the paper. In fact, a slightly narrower tool can also cut wider paper, but this leaves a little bit of paper in the cutting process, which affects the overall look. Therefore, if you need to cut wider paper or communicate with a supplier, it is recommended to replace a larger one.

 

If there is no problem in the above two cases, it may be that the phenomenon of the paper tray protruding from the right side portion after the cutter has been running for a certain period of time has an influence on the width of the cut paper.

 

1. When starting the operation, the strip at the edge is not tightened and can be avoided when the machine starts cutting the strip.

 

2. The inner diameter of the paper core added to the paper core is too large so that the paper core cannot be locked after the air shaft is expanded, so that the paper core slides during rotation to cause an offset. To solve this problem, check the inner diameter of the core when the core sleeve is in the intake shaft.